6383-0 데이터 시트보기 (PDF) - Unspecified

부품명

상세내역

일치하는 목록

6383-0

Banana Plug, User Installed (18-22 AWG)

Unspecified 

Pomona®

Model 6383

Banana Plug, User Installed

(18-22 AWG)

FIGURE #1

A. Slide plastic housing over wire.

B. Place stripped wire (18, 20, or 22 AWG) end into terminal hole.

FIGURE #2

C. Crimp terminal using a bare-terminal style crimper. Retention force of joint should exceed 12 pounds to assure no

damage occurs to joint when housing is snapped into place.

FIGURE #3

D. Slide housing over plug and pull on wire until snap engages.

All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm), .xxx = ± .005” (,127 mm).

All specifications are to the latest revisions. Specifications are subject to change without notice.

Registered trademarks are the property of their respective companies. Made in USA

6/9/99

Sales: 800-490-2361 Fax: 888-403-3360

SY/EH/LS

Technical Assistance: 800-241-2060

C:\Laura Goldberg\FlukeDataSheet\d6383_2_01.doc

PomonaACCESS 90835 (800) 444-6785 or (425) 446-6010

More drawings available at www.pomonaelectronics.com

Last saved by PN

Page 2 of 2

Share Link: