AXK8L34125BG 데이터 시트보기 (PDF) - Panasonic Corporation

부품명

상세내역

일치하는 목록

AXK8L34125BG

NARROW-PITCH CONNECTORS FOR BOARD-TO-FPC CONNECTION

Panasonic Corporation 

NOTES

1. Removal by pulling up from an end

causes the entire connector removal

force to concentrate on the soldering

terminals and end terminals.

Therefore, please lift and remove from

the side. Doing so will also prevent

cracking of the soldered parts.

Socket

Recommended PC board pattern

(Mount pad arrangement pattern)

1.40±0.03

0.40±0.03

0.23±0.03

0.40

C

AXK7L, 8L

Header

Recommended PC board pattern

(Mount pad arrangement pattern)

1.40±0.03

0.40±0.03

0.23±0.03

0.57±0.03

NG

Pull

2. PC Boards and Recommended

Metal Mask Patterns

Connectors are mounted with high

density, with a pitch interval of 0.4 to 0.5

mm.

In order to reduce solder bridge and

other issues make sure the proper levels

of solder are used.

The figures to the right are recommended

metal mask patterns. Please use them as

a reference.

In particular, if a lot of solder is

used in the header retaining

soldering terminals, it might

interfere with and cause incomplete

socket mating. Therefore, please

follow the recommended

conditions give on the right.

1.00±0.03

: Insulation area

Relation between connector and mounting pad

Recommended metal mask pattern

Metal mask thickness: Here, 150 µm

(Terminal portion opening area ratio: 53 %)

(Metal portion opening area ratio: 100 %)

1.40±0.01

1.00±0.01

(Max. 2.20)

(3.20±0.03)

(4.70±0.03)

Mounting pad

: Insulation area

Recommended metal mask pattern

Metal mask thickness: Here, 150 µm

(Terminal portion opening area ratio: 52 %)

(Metal portion opening area ratio: 80 %)

1.40±0.01

0.46±0.01

0.20±0.01

0.40±0.01

C

0.40

Recommended metal mask pattern

Metal mask thickness: Here, 120 µm

(Terminal portion opening area ratio: 66 %)

(Metal portion opening area ratio: 100 %)

1.40±0.01

1.00±0.01

0.20±0.01

0.40±0.01

Recommended metal mask pattern

Metal mask thickness: Here, 120 µm

(Terminal portion opening area ratio: 66 %)

(Metal portion opening area ratio: 100 %)

1.40±0.01

0.57±0.01

0.20±0.01

0.40±0.01

C

0.40

0.20±0.01

0.40±0.01

For other details, please verify with

the product specification sheets.

panasonic-electric-works.net/ac

Share Link: