150D474X5020A2B 데이터 시트보기 (PDF) - Unspecified

부품명

상세내역

일치하는 목록

150D474X5020A2B

Solid-Electrolyte TANTALEX® Capacitors Hermetically-Sealed, Axial-Lead

Unspecified 

150D

Vishay Sprague

Solid-Electrolyte TANTALEX® Capacitors

Hermetically-Sealed, Axial-Lead

PERFORMANCE CHARACTERISTICS

Operating Temperature: - 55 °C to + 85 °C

(To + 125 °C with voltage derating)

Capacitance Tolerance: At 120 Hz, + 25 °C. ± 20 %,

± 10 % standard. ± 5 % available as special.

Dissipation Factor: At 120 Hz, + 25 °C. Dissipation factor,

as determined from the expression 2πfRC, shall not exceed

the values listed in the Standard Ratings Tables.

DC Leakage Current (DCL Max.):

At + 25 °C: Leakage current shall not exceed the values

listed in the Standard Ratings Tables.

FEATURES

• Terminations: Tin/lead (SnPb), 100 % Tin

(RoHS compliant)

Available

• These high performance, hermetically-sealed

TANTALEX® capacitors have set the standard for

solid-electrolyte tantalum capacitors for more

than three decades.

RoHS*

COMPLIANT

• High capacitance, low DCL, low dissipation factor and

exceptional operating stability.

• Performance and reliability have been proven in

commercial, industrial and military applications.

• Available in four case codes and capacitors and are

supplied with plastic-film insulation.

• Terminals are solid, tinned nickel wire leads.

• The Military equivalent to the 150D is the CSR13 which is

qualified to MIL-C-39003/01.

At + 85 °C: Leakage current shall not exceed 10 times the

values listed in the Standard Ratings Tables.

At +125 °C: Leakage shall not exceed 15 times the values

listed in the Standard Ratings Tables.

Life Test: Capacitors shall withstand rated DC voltage

applied at + 85 °C for 2000 h or derated DC voltage applied

at + 125 °C for 1000 h

Following the life test:

1. DCL shall not exceed 125 % of the initial requirement

2. Dissipation Factor shall meet the initial requirement

3. Change in capacitance shall not exceed ± 5 %

DIMENSIONS in inches [millimeters]

1.500 ± 0.250

[38.10 ± 6.35]

1.500 ± 0.250

[38.10 ± 6.35]

L

-

+

D

DIA.

CASE CODE

A

B

R

S

SOLID TINNED

NICKEL LEADS

WITH INSULATING SLEEVE (1)

D

L

0.135 ± 0.016

[3.43 ± 0.41]

0.185 ± 0.016

[4.70 ± 0.41]

0.289 ± 0.016

[7.34 ± 0.41]

0.351 ± 0.016

[8.92 ± 0.41]

0.286 ± 0.031

[7.26 ± 0.79]

0.474 ± 0.031

[12.04 ± 0.79]

0.686 ± 0.031

[17.42 ± 0.79]

0.786 ± 0.031

[19.96 ± 0.79]

J

MAX..

0.047 [1.19] MAX.

0.125 [3.18] MAX.

J (MAXIMUM)

0.422

[10.720]

0.610

[15.490]

0.822

[20.880]

0.922

[23.420]

AWG

NO.

24

24

22

22

Note:

(1) When a shrink-fitted insulation is used, it shall lap over the ends of the capacitor body

* Pb containing terminations are not RoHs compliant, exemptions may apply

LEAD SIZE

NOMINAL

DIAMETER

0.020

[0.51]

0.020

[0.51]

0.025

[0.64]

0.025

[0.64]

www.vishay.com

18

For technical questions, contact: tantalum@vishay.com

Document Number: 40015

Revision: 16-Jan-08

Share Link: