XD010-04S-D4F(RevB) 데이터 시트보기 (PDF) - Sirenza Microdevices => RFMD
부품명
상세내역
일치하는 목록
XD010-04S-D4F Datasheet PDF : 4 Pages
| |||
Pin Description
Pin #
Function
1
RF Input
2
VD1
3
VD2
4
RF Output
Flange
Gnd
Preliminary
XD010-04S-D4F 350-600 MHz 10W Amp
Comments
Internally connected to DC ground. Do not apply DC voltages to the RF leads.
1st stage bias
2nd stage bias. Integrated temperature compensation maintains constant current over the operating tempera-
ture range. See Note 1.
Internally connected to DC ground. Do not apply DC voltages to the RF leads.
Baseplate provides electrical ground and a thermal transfer path for the device. Proper mounting assures opti-
mal performance and the highest reliablility. See Sirenza applications note: AN-060 Installation Instructions for
XD Module Series.
Simplified Device Schematic
2 VD1
3 VD2
RF
in
1
Bias
Network
Q1
Temperature
Compensation
Q2
RF
out
4
Case Flange = Ground
Absolute Maximum Ratings
Parameters
1st Stage Bias Voltage (VD1 )
2nd Stage Bias Voltage (VD2)
RF Input Power
Value
35
35
+20
Unit
V
V
dBm
Load VSWR for Continuous Operation With-
out Damage
5:1
VSWR
Device Channel Temperature
+200
ºC
Lead Temperature During Solder Reflow
+210
ºC
Operating Temperature Range
-20 to +90
ºC
Storage Temperature Range
-40 to +100 ºC
Operation of this device beyond any one of these limits may
cause permanent damage. For reliable continuous operation
refer to the key specifications table on the first page of the
datasheet.
Note 1:
The internally generated gate voltage is ther-
mally compensated to maintain constant drain
quiescent current over the temperature range
listed in the data sheet. No compensation is
provided for gain changes with temperature.
This can only be provided with an external
AGC circuit.
Note 2:
Internal RF decoupling is included on all bias
leads. No additional bypass elements are
required, however some applications may
require energy storage on the VD leads to
accommodate modulated signals.
Caution: ESD Sensitive
Appropriate precautions in handling, packag-
ing and testing devices must be observed.
303 S. Technology Court, Broomfield, CO 80021
Phone: (800) SMI-MMIC
2
http://www.sirenza.com
EDS-104259 Rev B
Share Link: 