VV6501 데이터 시트보기 (PDF) - STMicroelectronics

부품명

상세내역

일치하는 목록

VV6501

VGA CMOS Color Image Sensor

STMicroelectronics 

VV6501

Functional Description

The available range of exposure (without using clock division) is shown in Table 7.

Table 7: Exposure ranges [24MHz system clock]

Range

Min.

Max (default-VGA)

Max (available)

Coarse

(no. lines)

0

522

1023

Line length

(no. pixels)

762

762

1023

Fine

(no. pixels)

11

762

1023

Exposure

No. pixels

Time

0

400,050

10232 + 1023

0.92 µs

33.2 ms

87.3 ms

3.1.12 Gain timing and exposure updates

Exposure and gain values are re-timed within the sensor to ensure that a new set of values is only

applied to the sensor array at the start of each frame. Bit 0 of the status register is set high when a

new exposure value is written via the serial interface but has not yet been applied to the sensor

array.

There is a 1 frame latency between a new exposure value being applied to the sensor array and the

results of the new exposure value being read-out. The same latency does not exist for the gain

value. To ensure that the new exposure and gain values are aligned up correctly the sensor delays

the application of the new gain value by one frame relative to the application of the new exposure

value.

To eliminate the possibility of the sensor array seeing only part of the new exposure and gain

settings, if the serial interface communication extends over a frame boundary, the internal re-timing

of exposure and gain data is disabled while writing data to any location in the exposure page of the

serial interface register map. Thus, if the 5 bytes of exposure and gain data is sent as an auto-

increment sequence, it is not possible for the sensor to consume only part of the new exposure and

gain data.

21/60

Share Link: