TLP284(2009) 데이터 시트보기 (PDF) - Toshiba
부품명
상세내역
일치하는 목록
TLP284 Datasheet PDF : 16 Pages
| |||
Soldering and Storage
1. Soldering
TLP284
1.1 Soldering
When using a soldering iron or medium infrared ray/hot air reflow, avoid a rise in device temperature as
much as possible by observing the following conditions.
1) Using solder reflow
·Temperature profile example of lead (Pb) solder
(°C)
240
210
160
140
This profile is based on the device’s
maximum heat resistance guaranteed
value.
Set the preheat temperature/heating
temperature to the optimum temperature
corresponding to the solder paste
type used by the customer within the
described profile.
60 to 120s
less than 30s
Time
(s)
·Temperature profile example of using lead (Pb)-free solder
(°C)
260
230
190
180
This profile is based on the device’s
maximum heat resistance guaranteed
value.
Set the preheat temperature/heating
temperature to the optimum temperature
corresponding to the solder paste
type used by the customer within the
described profile.
60 to 120s
30 to 50s
Time
(s)
2) Using solder flow (for lead (Pb) solder, or lead (Pb)-free solder)
・Please preheat it at 150°C between 60 and 120 seconds.
・Complete soldering within 10 seconds below 260°C. Each pin may be heated at most once.
3) Using a soldering iron
Complete soldering within 10 seconds below 260°C, or within 3 seconds at 350°C. Each pin may
be heated at most once.
8
2009-05-27
Share Link: 