TA8423 데이터 시트보기 (PDF) - Toshiba
부품명
상세내역
일치하는 목록
TA8423 Datasheet PDF : 13 Pages
| |||
APPLICATION CIRCUIT
TA8423P/F
Note 1: Recommendable value of RF is 0.3 to 5 Ω. It depends on required initial torque, gain, coil impedance and
control voltage of Pin 5.
Note 2: To connect directly to IC Pin (Fin for F version and (13) Pin for P version) and GND to eliminate the influence
of common impedance.
It is required to increase the value of this capacitance for stable operations in case of poor wiring or
patterning of PCB.
Note 3: Special care should be taken not to have a common impedance with GND line, RF GND line and Hall Sensor
GND line.
Note 4: Please select to optimum value for eliminate a vibration noise and parasitic oscillation. And also to change
the connection (for example, each output to VCC or to RF) for getting better characteristics.
Note 5: Utmost care is necessary in the design of the output line, VCC and GND line since IC may be destroyed due
to short−circuit between outputs, air contamination fault, or fault by improper grounding.
10
2001-06-13
Share Link: 