TA8409S 데이터 시트보기 (PDF) - Toshiba
부품명
상세내역
일치하는 목록
TA8409S Datasheet PDF : 12 Pages
| |||
Application Circuit
(Note)
TA8409S/SG, F/FG
R
VS
VCC
VCC
VS
2/2
6/7
Vref
8/9
OUT1
IN1
9/10
TA8409S/SG,F/FG
7/8
IN2
1/1
M
OUT2
3/3
5/5
GND
TA8409S/SG, TA8409F/FG
Note 1: Attach a bypass capacitor to the Vs pin as required.
Note 2: Utmost care is necessary in the design of the output line, VS, VCC and GND line since the IC may be
destroyed by short-circuits between outputs, by supply faults, or by ground faults. Bear in mind also that
mounting the IC in the reverse orientation may also cause a breakdown.
Note 3: Switching the inputs may allow a pass-through current to flow. Keep the IC device in STOP mode (for at
least 100 µs) during the switching. Alternatively, insert a current-limiting resistor R.
Note 4: Use a current-limiting resistor R or fuse for overcurrent protection.
Note 5: When turning on the power for the IC device, apply VS after VCC (or VCC and VS simultaneously).
When shutting off the power, drop VS before VCC (or Vs and VCC simultaneously).
When turning on the power (VCC), keep both inputs (IN1 and IN2) on a low level.
8
2003-08-12
Share Link: 