ST7065C
One ST7065C used as a common driver and the other ST7065C as a segment
driver (FCS=0)
The ST7065C are used as common drivers, the FCS is set low and the signals (CL1,
CL2, M) from the controller are connected. V3&V5, V4&V6 are shorted in the
application circuit as shown in the following figure.
The other ST7065C are used as segment drivers, they will shift data on the falling
edge of CL2 and latch data on the falling edge of CL1. V3&V5, V4&V6 are shorted in
the application circuit as shown in the following figure.
V1.4c
11/14
2009/08/21