datasheetbank_Logo
전자부품 반도체 검색엔진( 무료 PDF 다운로드 ) - 데이터시트뱅크

LA1135 데이터 시트보기 (PDF) - SANYO -> Panasonic

부품명
상세내역
일치하는 목록
LA1135 Datasheet PDF : 18 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
Continued from preceding page.
LA1135, 1135M
Wide-band AGC OFF
Tracking at
each point
Unit (resistance: , capacitance: F)
Specification for coil
Usable sensitivity S/N 20 dB
Maximum sensitivity at –25 dB output
Receiving frequency, fr – kHz
YT-30202(Mitsumi)
1-3
84T
4-6
17T
2157-2239-649 (Sumida)
7BRS-9286A (Toko)
13. The variations (especially in case of small coupling coefficient) in the oscilation coil may cause a parasitic oscillation of
approximately 100 MHz to occur at the local oscillation buffer output (pin 20) at low temperatures. In this case, connect a
capacitor of 30 pF or greater across pin 20 and GND. (When the oscillation coil is used with no tap, no problem arises.)
14. The recommended double-tuning circuit has a loose coupling at 2T. Therefore, the change in the total number of turns may
affect the coupling coefficient subtly, causing a tight coupling and making the selectivity characteristic double-humped.
Especially for a receiving band of 1400 kHz or more, the tracking method may affect the band characteristic of sensitivity
and the cross modulation characteristic considerably. When making a design, check to see if critical coupling occurs or not.
15. Sensitivity difference at 600 kHz or less
In the application circuit configuration shown below, the bypass capacitor in the position where the tuning voltage is applied
and coupling L for double-tuning may cause an antiresonance point of 400 kHz to 600 kHz depending on the variations in
the coil, varactor diode, etc. The value of the bypass must be 0.047 µF or greater. The recommended value is 0.1 µF.
Unit (resistance: , capacitance: F)
No. 1272-8/18

Share Link: 

datasheetbank.com [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]