UT62L1024SCL-70LL 데이터 시트보기 (PDF) - Utron Technology Inc
부품명
상세내역
일치하는 목록
UT62L1024SCL-70LL Datasheet PDF : 17 Pages
| |||
UTRON
Rev. 1.9
UT62L1024
128KX8 BIT LOW POWER CMOS SRAM
Notes :
1. WE , CE must be high or CE2 must be low during all address transitions.
2.A write occurs during the overlap of a low CE , high CE2, low WE .
3. During a WE controlled write cycle with OE low, tWP must be greater than tWHZ+tDW to allow the drivers to turn off and data to be
placed on the bus.
4.During this period, I/O pins are in the output state, and input signals must not be applied.
5. If the CE low transition and CE2 high transition occurs simultaneously with or after WE low transition, the outputs remain in a high
impedance state.
6.tOW and tWHZ are specified with CL = 5pF. Transition is measured ± 500mV from steady state.
DATA RETENTION CHARACTERISTICS (TA= 0℃ to +70℃/-20℃ to +80℃(E))
PARAMETER
SYMBOL TEST CONDITION
Vcc for Data Retention VDR
CE ≧ VCC-0.2V or
CE2 ≤ 0.2V
Vcc=2V
-L
Data Retention Current IDR
CE ≧ VCC-0.2V or
CE2 ≤ 0.2V
- LL
Chip Disable to Data
Retention Time
tCDR See Data Retention
Waveforms (below)
Recovery Time
tR
tRC* = Read Cycle Time
*Those parameters are for reference only under 50℃
MIN. TYP.
2.0
-
MAX.
3.3
UNIT
V
-
1
40
10*
µA
-
0.3
20
5*
µA
0
-
-
ns
tRC*
-
-
ns
DATA RETENTION WAVEFORM
Low Vcc Data Retention Waveform (1) ( CE controlled)
VCC
CE
Vcc(min.)
tCDR
VIH
VDR ≧ 2V
CE ≧ VCC-0.2V
Vcc(min.)
tR
VIH
Low Vcc Data Retention Waveform (2) (CE2 controlled)
VCC
CE2
VCC(min.)
tCDR
VIL
VDR ≧ 2V
CE2 ≦ 0.2V
VCC(min.)
tR
VIL
UTRON TECHNOLOGY INC.
1F, No. 11, R&D Rd. II, Science-Based Industrial Park, Hsinchu, Taiwan, R. O. C.
TEL: 886-3-5777882 FAX: 886-3-5777919
7
P80033
Share Link: 