SL4049BN 데이터 시트보기 (PDF) - System Logic Semiconductor
부품명
상세내역
일치하는 목록
SL4049BN Datasheet PDF : 4 Pages
| |||
SL4049B
MAXIMUM RATINGS*
Symbol
Parameter
Value
Unit
VCC DC Supply Voltage (Referenced to GND)
VIN DC Input Voltage (Referenced to GND)
VOUT DC Output Voltage (Referenced to GND)
IIN
DC Input Current, per Pin
PD
Power Dissipation in Still Air, Plastic DIP+
SOIC Package+
PD
Power Dissipation per Output Transistor
Tstg Storage Temperature
TL
Lead Temperature, 1 mm from Case for 10 Seconds
(Plastic DIP or SOIC Package)
-0.5 to +20
V
VCC** to +18
V
-0.5 to VCC +0.5
V
±10
mA
750
mW
500
100
mW
-65 to +150
°C
260
°C
*Maximum Ratings are those values beyond which damage to the device may occur.
Functional operation should be restricted to the Recommended Operating Conditions.
+Derating - Plastic DIP: - 10 mW/°C from 65° to 125°C
SOIC Package: : - 7 mW/°C from 65° to 125°C
** The IW4049UB has high-to-low level voltage conversion capability but not low-to-high level; therefore it is
recommended that VIN ≥ VCC
RECOMMENDED OPERATING CONDITIONS
Symbol
Parameter
Min
Max
Unit
VCC
DC Supply Voltage (Referenced to GND)
3.0
18
V
VIN
DC Input Voltage (Referenced to GND)
VCC**
18
V
VOUT
DC Output Voltage (Referenced to GND)
0
VCC
V
TA
Operating Temperature, All Package Types
-55
+125
°C
** The SL4049B has high-to-low level voltage conversion capability but not low-to-high level; therefore it is
recommended that VIN ≥ VCC
This device contains protection circuitry to guard against damage due to high static voltages or electric
fields. However, precautions must be taken to avoid applications of any voltage higher than maximum rated
voltages to this high-impedance circuit. For proper operation, VIN and VOUT should be constrained to the range
GND≤(VIN or VOUT)≤VCC.
Unused inputs must always be tied to an appropriate logic voltage level (e.g., either GND or VCC).
Unused outputs must be left open.
SLS
System Logic
Semiconductor
Share Link: 