SJA1000U/N1 데이터 시트보기 (PDF) - NXP Semiconductors.

부품명

상세내역

일치하는 목록

SJA1000U/N1

Stand-alone CAN controller

NXP Semiconductors. 

Philips Semiconductors

Stand-alone CAN controller

Product specification

SJA1000

1 FEATURES

• Pin compatibility to the PCA82C200 stand-alone CAN

controller

• Electrical compatibility to the PCA82C200 stand-alone

CAN controller

• PCA82C200 mode (BasicCAN mode is default)

• Extended receive buffer (64-byte FIFO)

• CAN 2.0B protocol compatibility (extended frame

passive in PCA82C200 compatibility mode)

• Supports 11-bit identifier as well as 29-bit identifier

• Bit rates up to 1 Mbits/s

• PeliCAN mode extensions:

– Error counters with read/write access

– Programmable error warning limit

– Last error code register

– Error interrupt for each CAN-bus error

– Arbitration lost interrupt with detailed bit position

– Single-shot transmission (no re-transmission)

– Listen only mode (no acknowledge, no active error

flags)

– Hot plugging support (software driven bit rate

detection)

– Acceptance filter extension (4-byte code, 4-byte

mask)

– Reception of ‘own’ messages (self reception request)

• 24 MHz clock frequency

• Interfaces to a variety of microprocessors

• Programmable CAN output driver configuration

• Extended ambient temperature range (−40 to +125 °C).

2 GENERAL DESCRIPTION

The SJA1000 is a stand-alone controller for the Controller

Area Network (CAN) used within automotive and general

industrial environments. It is the successor of the

PCA82C200 CAN controller (BasicCAN) from Philips

Semiconductors. Additionally, a new mode of operation is

implemented (PeliCAN) which supports the CAN 2.0B

protocol specification with several new features.

3 ORDERING INFORMATION

TYPE NUMBER

SJA1000

SJA1000T

NAME

DIP28

SO28

PACKAGE

DESCRIPTION

plastic dual in-line package; 28 leads (600 mil)

plastic small outline package; 28 leads; body width 7.5 mm

VERSION

SOT117-1

SOT136-1

2000 Jan 04

3

Share Link: