SI-8050JD 데이터 시트보기 (PDF) - Sanken Electric co.,ltd.
부품명
상세내역
일치하는 목록
SI-8050JD Datasheet PDF : 10 Pages
| |||
SI-8050JD
Step-Down
to 5.0 V, 1.5 A,
DC/DC Converter
Tape and Reel Dimensions in Millimeters
SwRitecghuinlagtors
Tape Specifications
1. Material: conductive polystyrene.
2. Allowable camber: 1 mm/100 mm maximum.
3. A0 (10.6 mm) and B0 (15.7 mm) measured on a plane
0.3 mm above the bottom of the pocket.
4. K0 (4.9 mm) is measured from a plane on the inside
bottom of the pocket to the surface of the carrier.
5. Ten pitches cumulative tolerance on tape ±0.2 mm.
6. The space between parts and cavity must not exceed
±0.3 mm from its normal position in any direction.
7. Surface resistivity of embossment: 107 ohm/cm2 max.
8. K1 = 3.9 mm.
Detail C
115 Northeast Cutoff, Box 15036
8
Worcester, Massachusetts 01615-0036
Share Link: 