SC4217
Electrical Characteristics (continued)
Parameter
ADJ
Reference Voltage(1)
Adjust Pin Current(4)
Adjust Pin Threshold(5)
EN
Enable Pin Current
Enable Pin Theshold
Over Temperature Protection
High Trip Level
Hysteresis
Symbol
VREF
IADJ
VTH(ADJ)
IEN
VIH
VIL
THI
THYST
Conditions
VIN = 3.3V, VADJ = VOUT, IO = 10mA
VADJ = VREF
VEN = 0V, VIN = 3.3V
VIN = 3.3V
VIN = 3.3V
Min Typ Max Units
1.227
1.252
1.24
V
1.215
1.265
80
200
nA
0.05 0.16 0.40
V
1.5
10
µA
1.6
V
0.4
160
°C
10
Notes:
) Low duty cycle pulse testing with Kelvin connections required.
2) Defined as the input to output differential at which the output voltage drops to 1.5% below the value measured at a differential of 0.8V.
3) Required to maintain regulation. Voltage set resistors R1 and R2 are usually utilized to meet this requirement. Adjustable versions only.
4) Guaranteed by design.
5) When VADJ exceeds this threshold, the “Sense Select” switch disconnects the internal feedback chain from the error amplifier and connects VADJ instead.