SC420 데이터 시트보기 (PDF) - Semtech Corporation

부품명

상세내역

일치하는 목록

SC420

High Speed, Combi-Sense™, Synchronous Power MOSFET Driver for Mobile Applications

Semtech Corporation 

SC420

POWER MANAGEMENT

Applications Information (Cont.)

Start-up Sequencing

Manufacturing Guidelines

Proper sequencing of the Combi-SenseTM Controller and

SC420 driver during both start-up and shut-down is very

important. In general, the design must ensure that the

driver powers up (during start-up) before the controller

does, and that the driver powers down last during shut-

down. This ensures that the driver will never puts out

gate drive pulses which are not well-controlled, a situation

that can lead to MOSFET damage.

Detailed information on manufacturing and rework

of PCBs using the MLP package can be found in

the MLP application note “Comprehensive User’s

Guide - Micro Lead Frame Package” dated April

2002. Please contact your local Semtech

representative to obtain a copy of this application

note.

In general it is recommended that the Vcc’s for the Combi-

SenseTM Controller and SC420 be connected to the same

(5V) supply. If the EN controls are not used (tied high)

then the UVLO settings for the controller and driver will

guarantee the proper sequencing (the SC420 maximum

UVLO value is guaranteed to be lower than the Combi-

SenseTM Controller minimum UVLO value).

For absolute guarantee of proper sequencing it is rec-

ommended that the EN controls be used as shown in

the following block diagram. With this arrangement the

delayed PWRGD signal from the VccVID regulator is

used to enable both ICs. The Soft-Start time established

for the controller ensures it will come up well after the

SC420. During power-down de-assertion of

VID_PWRGD will ensure simultaneous disabling of the

Combi-SenseTM Controller and SC420.

V5

SC1403

SYS_PWRGD

V3

VR_ON

VccVID Regulator

VID_PWRGD

CO

SC400

EN

SC420

EN

Vcc-CORE

VccPWRGD

© 2003 Semtech Corp.

9

United States Patent No. 6,441,597

www.semtech.com

Share Link: