SC1153 데이터 시트보기 (PDF) - Semtech Corporation

부품명

상세내역

일치하는 목록

SC1153

PROGRAMMABLE SYNCHRONOUS DC/DC CONTROLLER FOR ADVANCED PROCESSORS

Semtech Corporation 

PRELIMINARY - October 3, 2000

OUTLINE DRAWING SO-20

PROGRAMMABLE SYNCHRONOUS DC/DC

CONTROLLER FOR ADVANCED PROCESSORS

SC1153

Ref. MS-013AC

THEORY OF OPERATION

The voltage at the VOSENSE pin is applied, through the internal precision resistor feedback chain, to the inverting

input of the error amplifier. The non-inverting input of the error amplifier is supplied with a DC voltage derived by

the DAC from the internal trimmed bandgap voltage reference. The output of the error amplifier is compared to the

triangular output of the internal oscillator to generate a fixed frequency, variable duty cycle pulse train. The internal

oscillator uses an on-chip capacitor and precision trimmed current sources to set the frequency to 200kHz.

The generated pulse train is gated with the output of the current limit latch and the inhibit signal to produce a drive

signal for the upper FET. It is also inverted to produce a drive signal for the lower FET. These FET drive signals

are modified by the “shoot-through control” circuitry so that the top FET turn-on is delayed until the bottom FET has

turned off, and visa-versa.

The current limit latch is set (ending the upper FET drive pulse early) if the current limit comparator indicates an

overcurrent condition. The latch is reset at the start of each oscillator period.

The PWRGOOD and OVP signals are derived from the voltage at the VOSENSE pin by comparators fed from the

internal feedback chain.

ECN00-1346

© 2000 SEMTECH CORP.

7

652 MITCHELL ROAD NEWBURY PARK CA 91320

Share Link: