S5990-01 데이터 시트보기 (PDF) - Hamamatsu Photonics
부품명
상세내역
일치하는 목록
S5990-01 Datasheet PDF : 2 Pages
| |||
Two-dimensional PSD S5990-01, S5991-01
s Spectral response
0.8
(Typ. Ta=25 ˚C)
s Dark current vs. reverse voltage
10 nA
(Typ. Ta=25 ˚C)
s Terminal capacitance vs. reverse voltage
10 nF
(Typ. Ta=25 ˚C)
0.7
S5991-01
0.6
1 nA
S5991-01
1 nF
0.5
S5990-01
0.4
100 pA
0.3
100 pF
0.2
10 pA
S5990-01
0.1
0
300 400 500 600 700 800 900 1000 1100
1 pA
0.1
1
10
100
10 pF
0.1
1
10
100
WAVELENGTH (nm)
KPSDB0026EA
REVERSE VOLTAGE (V)
KPSDB0068EA
s Example of position detectability
(Ta=25 °C, λ=830 nm,
Spot light size: φ0.2 mm)
S5990-01
(SCAN INTERVAL: 0.4 mm)
s Dimensional outlines (unit: mm)
S5990-01
8.8 ± 0.15
(4 ×) R0.3 Y2
oACTIVE AREA
4.0
X1
X2
Y1
REVERSE VOLTAGE (V)
KPSDB0073EA
S5991-01
(4 ×) R0.3
14.5 ± 0.2
Y2
X1
oACTIVE AREA
9.0
X2
PHOTOSENSITIVE SILICONE
Y1
SURFACE
RESIN
S5991-01
KPSDC0064EA
(SCAN INTERVAL: 1 mm)
KPSDC0065EA
(10 ×) 0.6
1.27
The burr of 0.3 mm maximum on
each side should be allowed
ANODE X1 (I1)
NC
NC
NC
ANODE Y1 (I3)
ANODE X2 (I2)
NC
CATHODE
NC
ANODE Y2 (I4)
pin should be open-circuited
s Conversion formula
KPSDA0044EA
(I2 + I3) - (I1 + I4) 2x
=
I1 + I2 + I3 + I4 L
(I2 + I4) - (I1 + I3) 2y
I1 + I2 + I3 + I4 = L
x, y: position coordinate of spot light
S5990-01: L=4.5 mm
S5991-01: L=10 mm
PHOTOSENSITIVE SILICONE
SURFACE
RESIN
(10 ×) 1.2
2.54
The burr of 0.3 mm maximum on
each side should be allowed
ANODE X1 (I1)
NC
NC
NC
ANODE Y1 (I3)
ANODE X2 (I2)
NC
CATHODE
NC
10 ANODE Y2 (I4)
pin should be open-circuited
KPSDA0045EA
Precautions for use
q The light input window of this product uses soft silicone resin. Avoid touching the window to keep it from grime and damage that
can decrease sensitivity. External force applied to the resin surface may deform or cut off the wires, so do not touch the window
to prevent such troubles.
q Use rosin flux when soldering, to prevent the terminal lead corrosion. Reflow oven temperature should be at 260 °C maximum for 5
seconds maximum time under the conditions that no moisture absorption occurs.
Reflow soldering conditions differ depending on the type of PC board and reflow oven. Carefully check these conditions before use.
q Silicone resin swells when it absorbs organic solvent, so do not use any solvent other than alcohol.
q Avoid unpacking until you actually use this product to prevent the terminals from oxidation and dust deposits or the coated resin
from absorbing moisture.
When the product is stored for 3 months while not unpacked or 24 hours have elapsed after unpacking, perform baking in
nitrogen atmosphere at 150 °C for 3 to 5 hours or at 120 °C for 12 to 15 hours before use.
Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions.
Specifications are subject to change without notice. No patent rights are granted to any of the circuits described herein. ©2001 Hamamatsu Photonics K.K.
HAMAMATSU PHOTONICS K.K., Solid State Division
1126-1 Ichino-cho, Higashi-ku, Hamamatsu City, 435-8558 Japan, Telephone: (81) 53-434-3311, Fax: (81) 53-434-5184, http://www.hamamatsu.com
U.S.A.: Hamamatsu Corporation: 360 Foothill Road, P.O.Box 6910, Bridgewater, N.J. 08807-0910, U.S.A., Telephone: (1) 908-231-0960, Fax: (1) 908-231-1218
Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49) 08152-3750, Fax: (49) 08152-2658
France: Hamamatsu Photonics France S.A.R.L.: 19, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: 33-(1) 69 53 71 00, Fax: 33-(1) 69 53 71 10
United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road, Welwyn Garden City, Hertfordshire AL7 1BW, United Kingdom, Telephone: (44) 1707-294888, Fax: (44) 1707-325777
North Europe: Hamamatsu Photonics Norden AB: Smidesvägen 12, SE-171 41 Solna, Sweden, Telephone: (46) 8-509-031-00, Fax: (46) 8-509-031-01
Italy: Hamamatsu Photonics Italia S.R.L.: Strada della Moia, 1/E, 20020 Arese, (Milano), Italy, Telephone: (39) 02-935-81-733, Fax: (39) 02-935-81-741
Cat. No. KPSD1010E03
Apr. 2001 DN
Share Link: 