S116S02F 데이터 시트보기 (PDF) - Sharp Electronics
부품명
상세내역
일치하는 목록
S116S02F Datasheet PDF : 13 Pages
| |||
S116S02 Series
S216S02 Series
∗Non-zero cross type is also available. (S116S01 Series/
S216S01 Series)
S116S02 Series
S216S02 Series
IT(rms)≤16A, Zero Cross type
SIP 4pin
Triac output SSR
■ Description
S116S02 Series and S216S02 Series Solid State
Relays (SSR) are an integration of an infrared emitting
diode (IRED), a Phototriac Detector and a main output
Triac. These devices are ideally suited for controlling
high voltage AC loads with solid state reliability while
providing 4.0kV isolation (Viso(rms)) from input to
output.
■ Features
1. Output current, IT(rms)≤16.0A
2. Zero crossing functionary (VOX : MAX. 35V)
3. 4 pin SIP package
4. High repetitive peak off-state voltage
(VDRM : 600V, S216S02 Series)
(VDRM : 400V, S116S02 Series)
5. High isolation voltage between input and output
(Viso(rms) : 4.0kV)
6. Lead-free terminal components are also available
(see Model Line-up section in this datasheet)
7. Screw hole for heat sink
■ Agency approvals/Compliance
1. Recognized by UL508 (only for S116S02 Series), file
No. E94758 (as models No. S116S02)
2. Approved by CSA 22.2 No.14 (only for S116S02
Series), file No. LR63705 (as models No. S116S02)
3. Package resin : UL flammability grade (94V-0)
■ Applications
1. Isolated interface between high voltage AC devices
and lower voltage DC control circuitry.
2. Switching motors, fans, heaters, solenoids, and
valves.
3. Power control in applications such as lighting and
temperature control equipment.
Notice The content of data sheet is subject to change without prior notice.
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP
devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
Sheet No.:D4-A02701EN
1
Date Apr. 28. 2004
© SHARP Corporation
Share Link: 