S-812C36AUA-C2Q-T2 데이터 시트보기 (PDF) - Seiko Instruments Inc

부품명

상세내역

일치하는 목록

S-812C36AUA-C2Q-T2

HIGH OPERATING VOLTAGE CMOS VOLTAGE REGULATOR

Seiko Instruments Inc 

HIGH OPERATING VOLTAGE CMOS VOLTAGE REGULATOR

S-812C Series

Capacitor C1 has an effect in minimizing output

fluctuation due to power-on, power line VIN VIN

variation and load variation. Determine the

optimum value in the actual device.

S-812C

Series

VSS

VOUT

ON/OFF

R1

CIN

C1

R2

GND

It is not also recommended to attach a

capacitor between the S-812 power source VIN

and VSS pins or between output VOUT and

VSS pins because output fluctuation or

oscillation at powering on might occur.

Figure 13 Voltage Adjustment Circuit

Rev.1.0

VOUT1

CL

„ Notice

• Wiring patterns for VIN, VOUT and GND pins should be designed to hold low impedance.

When mounting an output capacitor, the distance from the capacitor to the VOUT pin and to the VSS pin

should be as short as possible.

• Note that output voltage may increase when a voltage regulator is used at low load current (less than 1 µA).

• At low load current less than 100µA output voltage may increase when the regulating operation is halted by

the ON/OFF pin.

• To prevent oscillation, it is recommended to use the external components under the following conditions:

Equivalent Series Resistance (ESR): 10 Ω or less when an output capacitor is used.

Input series resistance (RIN): 10 Ω or less

• A voltage regulator may oscillate when the impedance of the power supply is high and the input capacitor is

small or not connected.

• The application condition for input voltage and load current should not exceed the package power

dissipation.

• SII claims no responsibility for any and all disputes arising out of or in connection with any infringement of

the products including this IC upon patents owned by a third party.

10

Seiko Instruments Inc.

Share Link: