PI49FCT32803LE(2008) 데이터 시트보기 (PDF) - Pericom Semiconductor

부품명

상세내역

일치하는 목록

PI49FCT32803LE
(Rev.:2008)

1:5/1:7 3.3V CMOS Clock Drivers

Pericom Semiconductor 

PI49FCT32802

PI49FCT32803

1:5/1:7 3.3V CMOS Clock Drivers

Maximum Ratings

(Above which the useful life may be impaired. For user guidelines, not tested.)

Storage Temperature ............................................................ –65°C to +150°C

Ambient Temperature with Power Applied ........................... –40°C to +85°C

Supply Voltage to Ground Potential........................................–0.5V to +5.5V

DC Input Voltage ....................................................................–0.5V to +5.5V

DC Output Current............................................................................... 120mA

Note:

Stresses greater than those listed under MAXIMUM

RATINGS may cause permanent damage to the

device. This is a stress rating only and functional operation

of the device at these or any other conditions above those

indicated in the operational sections of this specification is

not implied. Exposure to absolute maximum rating condi-

tions for extended periods may affect reliability.

Power Dissipation ................................................................................... 0.5W

DC Electrical Characteristics (Over the Operating Range)

Symbol

Description

Test Conditions(1)

Min. Typ. Max.

VOH Output HIGH voltage VCC=3V,VIN=VIH or VIL IOH = –8mA

2.4

3

–

VOL Output LOW voltage VCC=3V, VIN=VIH or VIL IOL = 12mA

–

0.4

0.5

VIH Input HIGH voltage Guaranteed Logic HIGH Level (Input Pins)

2

–

5.5

VIL Input LOW voltage Guaranteed Logic LOW Level (Input Pins)

–0.5

–

0.8

IIH

Input HIGH current VCC = 3.6V

VIN = 3.6V

–

–

1

IIL

Input LOW current VCC = 3.6V

VIN = 0V

–

–

–1

VIK Clamp diode voltage VCC = Min., IIN = –18mA

IOH

Output HIGH current VCC = 3.3V, VIN = VIH or VIL, VOUT = 1.5V(5)

IOL

Output LOW current VCC = 3.3V, VIN = VIH or VIL, VOUT = 1.5V(5)

IOS

Short circuit current(5) VCC = Max., VOUT = GND(5)

–

–0.7

–1.2

–25

–45

–80

25

45

90

–50 –100 –180

VH

Input Hysteresis

–

150

–

RS

Series Resistor

22

Notes:

1. For Max. or Min. conditions, use appropriate value specified under Electrical Characteristics for the applicable device type.

2. Typical values are at VCC = 3.3V, +25°C ambient and maximum loading.

3. VOH = VCC – 0.6V at rated current.

4. This parameter is determined by device characterization but is not production tested.

5. Not more than one output should be shorted at one time. Duration of the test should not exceed one second.

Units

V

μA

V

mA

mV

Ω

08-0298

PS8704C

11/13/08

2

Share Link: