MC54HC597A 데이터 시트보기 (PDF) - Motorola => Freescale

부품명

상세내역

일치하는 목록

MC54HC597A

8-Bit Serial or Parallel-Input/Serial-Output Shift Register with Input Latch

Motorola => Freescale 

MC54/74HC597A

PIN DESCRIPTIONS

DATA INPUTS

A, B, C, D, E, F, G, H (Pins 15, 1, 2, 3, 4, 5, 6, 7)

Parallel data inputs. Data on these inputs is stored in the

input latch on the rising edge of the Latch Clock input.

SA (Pin 14)

Serial data input. Data on this input is shifted into the shift

register on the rising edge of the Shift Clock input it Serial

Shift/Parallel Load is high. Data on this input is ignored when

Serial Shift/Parallel Load is low.

CONTROL INPUTS

Serial Shift/Parallel Load (Pin 13)

Shift register mode control. When a high level is applied to

this pin, the shift register is allowed to serially shift data.

When a low level is applied to this pin, the shift register

accepts parallel data from the input latch, and serial shifting

is inhibited.

Reset (Pin 10)

Asynchronous, Active–low shift register reset. A low level

applied to this input resets the shift register to a low level, but

does not change the data in the input latch.

Shift Clock (Pin 11)

Serial shift register clock. A low–to–high transition on this

input shifts data on the Serial Data Input into the shift register

and data in stage H is shifted out QH, being replaced by the

data previously stored in stage G.

Latch Clock (Pin 12)

Latch clock. A low–to–high transition on this input loads

the parallel data on inputs A–H into the input latch.

OUTPUT

QH (Pin 9)

Serial data output. This pin is the output from the last stage

of the shift register.

MOTOROLA

4

High–Speed CMOS Logic Data

DL129 — Rev 6

Share Link: