PD45128163-SU 데이터 시트보기 (PDF) - Elpida Memory, Inc

부품명

상세내역

일치하는 목록

PD45128163-SU

128M-bit Synchronous DRAM 4-bank, LVTTL WTR (Wide Temperature Range)

Elpida Memory, Inc 

µPD45128163-SU

Write command

Fig.4 Column address and write command

(/CS, /CAS, /WE = Low, /RAS = High)

If the mode register is in the burst write mode, this command sets the

burst start address given by the column address to begin the burst

write operation. The first write data in burst mode can input with this

command with subsequent data on following clocks.

CLK

CKE

/CS

/RAS

/CAS

/WE

BA0(A13), BA1(A12)

A10

Add

H

Col.

Read command

Fig.5 Column address and read command

(/CS, /CAS = Low, /RAS, /WE = High)

Read data is available after /CAS latency requirements have been

met. This command sets the burst start address given by the column

address.

CLK

CKE

/CS

/RAS

/CAS

/WE

BA0(A13), BA1(A12)

A10

Add

H

Col.

CBR (auto) refresh command

(/CS, /RAS, /CAS = Low, /WE, CKE = High)

This command is a request to begin the CBR (auto) refresh

operation. The refresh address is generated internally.

Before executing CBR (auto) refresh, all banks must be precharged.

After this cycle, all banks will be in the idle (precharged) state and

ready for a row activate command.

During tRC period (from refresh command to refresh or activate

command), the µPD45128163 cannot accept any other command.

Fig.6 CBR (auto) refresh command

CLK

CKE H

/CS

/RAS

/CAS

/WE

BA0(A13), BA1(A12)

A10

Add

10

Preliminary Data Sheet E0242N10

Share Link: