NX-09T-CV 데이터 시트보기 (PDF) - HIROSE ELECTRIC

부품명

상세내역

일치하는 목록

NX-09T-CV

I/O Card Interface Connectors

HIROSE ELECTRIC 

I/O Card Interface Connectors

NX Series

sFeatures

1. Low Profile

Protorusion above the PCB board is only 2.9mm, and the

connectors can be mounted to type I and II I/O cards.

2. EMI/RFI protection

Full metal shielding. Shield connects first, ahead of

contacts.

3. ESD Secure

Thermoplastic molded covers assures insulation

of the connections and shields from ESD.

4. Secure Latching

A built-in latch assures correct and secure

mating of connector.

5. Reliable Conductor Termination

Reliable termination of conductors is

accomplished by proven IDC termination.

6. Sequential Mating

The 0.8mm pitch contacts are engaging the

corresponding parts in sequence: Ground-

Power & Signal

7. Rugged Construction

Securely attached to the board with optional

screws.

8. Card Frame Kits

Available as a separate part number.

9. Secure Attachment to Frame Kit.

Compliant mounting bracket attaches the

connectore directly to the frame kit.

sApplications

Used with I/O cards, portable personal computers,and the external connections of various small-sized portable

terminals.

sSpecifications

Ratings

Current rating 0.5 A

Operating temperature

Operating humidity

Voltage rating 125 V AC

-30ç to +70ç (Note 1) Storage temperature range -10ç to +60ç (Note 2)

95% R.H. or less

(No condensation)

Storage humidity range 40 to 70% (Note 2)

Item

1. Insulation resistance

2. Withstanding voltage

3. Contact resistance

4. Vibration

Specification

250 M ohms min.

No flashover or insulation breakdown.

40 m ohms max.

No electrical discontinuity of 10µs or

more

100 V DC

300 V AC / 1 minute

100 mA

Conditions

Frequency: 10 to 55 Hz, single amplitude of 0.75 mm,

2 hours in each of the 3 directions.

5. Humidity (Steady state) Insulation resistance: 100 M ohms min. 96 hours at temperature of 60ç and humidity of 90% to 95%

6. Temperature cycle

No damage, cracks, or parts looseness.

-55ç, 30 min./15 to 30ç, within 5 min/85ç, 30 min

/15 to 35ç, within 5 min, for 5 cycles

7. Durability

(Insertion/withdrawal)

60 m ohms max.

3000 cycles

8. Resistance to

Soldering heat

No deformation of components affecting Reflow: At the recommended temperature profile

performance.

Manual soldering: 300ç for 3 seconds

Note 1: Includes temperature rise caused by current flow.

Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature

Range and Humidity range covers non- conducting condition of installed connectors in storage, shipment or during

transportation.

B8

Share Link: