NTE9601 데이터 시트보기 (PDF) - NTE Electronics
부품명
상세내역
일치하는 목록
NTE9601 Datasheet PDF : 4 Pages
| |||
Recommended Operating Conditions:
Parameter
Symbol
Test Conditions
Supply Voltage
High Level Input Voltage
Low Level Input Voltage
High Level Output Current
VCC
VIH TA = 0°C
TA = +25°C
TA = +75°C
VIL TA = 0°C
TA = +25°C
TA = +75°C
IOH
Low Level Output Current
IOL
Free Air Ambient Temperature
TA
Min Typ Max Unit
4.75 5.00 5.25 V
1.9 -
-
V
1.8 -
-
V
1.6 -
-
V
-
- 0.85 V
-
- 0.85 V
-
- 0.85 V
-
- -0.96 mA
-
- 12.8 mA
0
- +75 °C
Electrical Characteristics: (TA = 0° to +70°C, Note 2, Note 4 unless otherwise specified)
Parameter
Symbol
Test Conditions
Min Typ Max Unit
Input Clamp Voltage
High Level Output Voltage
Low Level Output Voltage
High Level Input Current
Low Level Input Current
Short Circuit Output Current
Supply Current
VI
VOH
VOL
IIH
IIL
IOS
ICC
VCC = Min, II = -12mA
VCC = Min, IOH = Max, VIL = Max,
VIH = Min, Note 5
VCC = Max, VI = 4.5V
VCC = Max, VIN = 0.45V
VCC = Max, Note 3, Note 5
VCC = Max
-
- -1.5 V
2.4 -
-
V
-
- 0.45 V
-
- 60 μA
-
- -1.6 mA
-10 - -40 mA
-
- 25 mA
Note 2. All typical ratings are at VCC = 5V, TA = +25°C.
Note 3. Not more than one output should be shorted at a time.
Note 4. Unless otherwise noted, 10kΩ resistor placed between Pin13 and VCC, for all tests.
Note 5. GND Pin11 for VOL test on Pin6, VOH and IOS test on Pin8. Open Pin11 for VOL test on Pin8,
VOH and IOS test on Pin6.
Switching Characteristics: (VCC = 5V, TA = +25°C unless otherwise specified)
Parameter
Symbol
From (Input)
To (Output)
Test Conditions
Min Max Unit
Propagation Delay Time
Low to High Level Output
tPLH
Negative Trigger CL = 15pF, CX = 0,
Input to
RX = 5kΩ
True Output
- 40 ns
Propagation Delay Time
High to Low Level Output
Minimum True Output Pulse Width
tPHL
tPW(MIN)
Negative Trigger
Input to
Complement Output
- 40 ns
- 65 ns
Pulse Width
tPW
RX = 10kΩ, CX = 1000pF 3.08 3.76 μs
Maximum Allowable Wiring
Capacitance
CSTRAY
Pin13 to GND
- 50 pF
External Timing Reststor
RX
- 25 kΩ
Share Link: 