MIC2095-1YMT 데이터 시트보기 (PDF) - Micrel

부품명

상세내역

일치하는 목록

MIC2095-1YMT

USB Power Controller Advance Information

Micrel 

Micrel, Inc.

MIC2095/97/98/99

Pin Description

Pin Number

1

2

(MIC2095/MIC2098)

2

(MIC2097/MIC2099)

3

4

(MIC2095-1/MIC2097-1/

MIC2098-1/MIC2099-1)

4

(MIC2095-2/MIC2097-2/

MIC2098-2/MIC2099-2)

5

6

EP

Pin Name Pin Function

VOUT Switch output (Output): The load being driven by the switch is connected to this pin.

NC

No Connect; Pin not used.

ILIMIT

FAULT/

Current Limit (Input): A resistor from this pin to ground sets the current limit value. See

the “setting ILMIIT” section for details on setting the resistor value.

Fault status (Output): A logic low on this pin indicates the switch is in current limiting, or

has been shut down by the thermal protection circuit. This is an open-drain output

allowing logical OR’ing of FAULT/ outputs from multiple devices.

ENABLE Switch Enable (Input): Logic high on this pin enables the switch.

ENABLE/ Switch Enable (Input): Logic low on this pin enables the switch.

GND

VIN

EP

Ground.

Power input (Input): This pin provides power to both the output power switch and the

internal control circuitry.

Used to remove heat from die. Connect to ground. Use multiple vias to the ground

plane to minimize thermal impedance. See Applications Section for additional

information.

August 2011

3

M9999-080211-C

Share Link: