MH88634K 데이터 시트보기 (PDF) - Mitel Networks
부품명
상세내역
일치하는 목록
MH88634K Datasheet PDF : 8 Pages
| |||
MH88634K
Preliminary Information
TIP
1
RING
2
XLA
3
XLD
4
XLB
5
XLC
6
IC
7
IC
8
IC
9
SO
10
Rx
11
VEE
12
Tx
13
RV
14
FL
15
RL
16
VDD
17
AGND
18
LRC
19
VRLY
20
LRD
21
Pin Description
Figure 2 - Pin Connections
Pin # Name
Description
1
TIP Tip Lead. Connects to the “Tip” lead of the central office
2
RING Ring Lead: Connects to the “Ring” lead of the central office
3
XLA Loop Relay Contact A:. Connects to XLB through the Loop relay (K1) contacts when the
relay is activated. This operates the internal active termination circuitry.
4
XLD Loop Relay Contact D: See XLC for description
5
XLB Loop Relay Contact B: See XLA for description
6
XLC Loop Relay Contact C: Connects to XLD through the loop relay (K1) contacts when the
relay is activated. This operates the internal active termination circuitry.
7
IC Internal Connection: This pin is internally connected and must be left open.
8
IC Internal Connection.: This pin is internally connected and must be left open.
9
IC Internal Connection: This pin is internally connected and must be left open.
10
SO Service Out Detect (Output). A logic low indicates that the central office “Tip” and “Ring”
are out of service.
11
Rx Receive (Input): 4-Wire ground (AGND) referenced audio input.
12
VEE Negative Supply Voltage. -5V
13
Tx Transmit (Output). 4-Wire ground (AGND) referenced audio output.
14
RV Ring Voltage Detect (Output). A logic low indicates that ringing voltage is across the Tip
and Ring leads. Note that this output toggles at the ringing cadence and not at the ringing
frequency.
15
FL Forward Loop Detect (Output). In the on-hook state, a logic low output indicates that
forward loop battery is present. In the off-hook state, a logic low indicates that forward loop
current is present
16
RL Reverse Loop Detect (Output): In the on-hook state, a logic low output indicates that
reverse loop battery is present. In the off-hook state, a logic low output indicates that reverse
loop current is present. Reverse loop refers to the Tip lead negative respect to the Ring lead.
2-262
Share Link: 