MDC-164 데이터 시트보기 (PDF) - Tyco Electronics
부품명
상세내역
일치하는 목록
MDC-164 Datasheet PDF : 3 Pages
| |||
Termination-Insensitive Mixer,
0.5 - 9 GHz
Features
C-3
• Intermodulation Ratio Insensitive to
IF Ports Mismatches
• Conversion Loss: 6.5 dB Typical Midband
• Maximum Input Power: 350 mW max. @ 25°C,
Derated 3.5 mW/°C
• Low Power: +24 dBm Max.
• MIL-STD-883 Screening Available
Description
The unique design of the termination insensitive
mixer (TIM) enables it to apply high reverse voltage
to diodes during their “off” phase, in the LO cycle.
This allows for higher power level performance with
minimum distortion. In addition the TIM has internal
loads that provide a good match and also absorb
mixer generated LO frequency terms. Combined,
these features give the mixer its insensitivity to
external mismatches, plus superior VSWR.
MDC-164
V3
1
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.
Share Link: 