MD-161 데이터 시트보기 (PDF) - M/A-COM Technology Solutions, Inc.
부품명
상세내역
일치하는 목록
MD-161 Datasheet PDF : 3 Pages
| |||
MD-161
Termination Insensitive Mixer,
1 - 500 MHz
Features
• Third Order Intermodulation Ratio is Insensitive
to Port Mismatches
• Conversion Loss: 6dB Typical Midband
• DC Coupled IF Port
• High Level Phase Detector
• Impedance: 50 Ohms Nominal
• Maximum Input Power: 350 mW Max @ 25°C,
Derated to 85°C @ 3.2 mW/°C
• LO Power: +24 dBm Max.
• IF Port Current: 50 mA Max.
• MIL-STD-883 Screening Available
Description
The unique design of the termination insensitive
mixer (TIM) enables it to apply high reverse voltage
to diodes during their “off” phase, in the LO cycle.
This allows for higher power level performance with
minimum distortion. In addition the TIM has internal
loads that provide a good match and also absorb
mixer generated LO frequency terms. Combined,
these features give the mixer its
insensitivity to external mismatches, plus superior
VSWR.
FP-2
Rev. V3
Pin Configuration
Pin No.
1
2
3
4
Function
GND
GND
GND
IF
Pin No.
5
6
7
8
Function
LO
GND
GND
RF
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: +91.80.4155721
• China Tel: +86.21.2407.1588
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
Share Link: 