MCIMX35 데이터 시트보기 (PDF) - Freescale Semiconductor

부품명

상세내역

일치하는 목록

MCIMX35

i.MX35 Applications Processors for Automotive Products

Freescale Semiconductor 

The i.MX35 core is intended to operate at a maximum frequency of 532 MHz to support the required

multimedia use cases. Furthermore, an image processing unit (IPU) is integrated into the AP domain to

offload the ARM11 core from performing functions such as color space conversion, image rotation and

scaling, graphics overlay, and pre- and post-processing.

The functionality of AP Domain peripherals includes the user interface; the connectivity, display, security,

and memory interfaces; and 128 Kbytes of multipurpose SRAM.

2.2 Shared Domain Overview

The shared domain is composed of the shared peripherals, a smart DMA engine (SDMA) and a number of

miscellaneous modules. For maximum flexibility, some peripherals are directly accessible by the SDMA

engine.

The i.MX35 has a hierarchical memory architecture including L1 caches and a unified L2 cache. This

reduces the bandwidth demands for the external bus and external memory. The external memory

subsystem supports a flexible external memory system, including support for SDRAM (SDR, DDR2 and

mobile DDR) and NAND Flash.

2.3 Advanced Power Management Overview

To address the continuing need to reduce power consumption, the following techniques are incorporated

in the i.MX35:

• Clock gating

• Power gating

• Power-optimized synthesis

• Well biasing

The insertion of gating into the clock paths allows unused portions of the chip to be disabled. Because

static CMOS logic consumes only leakage power, significant power savings can be realized.

“Well biasing” is applying a voltage that is greater than VDD to the nwells, and one that is lower than VSS

to the pwells. The effect of applying this well back bias voltage reduces the subthreshold channel leakage.

For the 90-nm digital process, it is estimated that the subthreshold leakage is reduced by a factor of ten

over the nominal leakage. Additionally, the supply voltage for internal logic can be reduced from 1.4 V to

1.22 V.

2.4 ARM11 Microprocessor Core

The CPU of the i.MX35 is the ARM1136JF-S core, based on the ARM v6 architecture. This core supports

the ARM Thumb® instruction sets, features Jazelle® technology (which enables direct execution of Java

byte codes) and a range of SIMD DSP instructions that operate on 16-bit or 8-bit data values in 32-bit

registers.

The ARM1136JF-S processor core features are as follows:

• Integer unit with integral EmbeddedICE™ logic

• Eight-stage pipeline

i.MX35 Applications Processors for Automotive Products, Rev. 8

6

Freescale Semiconductor

Share Link: