33889 데이터 시트보기 (PDF) - Freescale Semiconductor
부품명
상세내역
일치하는 목록
33889 Datasheet PDF : 60 Pages
| |||
ELECTRICAL CHARACTERISTICS
STATIC ELECTRICAL CHARACTERISTICS
STATIC ELECTRICAL CHARACTERISTICS
Table 4. Static Electrical Characteristics .
Characteristics noted under conditions - VSUP From 5.5 V to 18 V and TJ from -40°C to 125°C, unless otherwise noted. Typical
values noted reflect the approximate parameter means at TA = 25°C under nominal conditions unless otherwise noted.
Description
Symbol
Min
Typ
Max
Unit
INPUT PIN (VSUP)
Nominal DC Voltage range
Extended DC Voltage range 1
Reduced functionality (6)
Extended DC Voltage range 2 (8)
Input Voltage during Load Dump
Load dump situation
VSUP
5.5
-
18
V
VSUP-EX1
4.5
-
5.5
V
VSUP-EX2
18
-
27
V
VSUPLD
-
-
40
V
Input Voltage during jump start
Jump start situation
VSUPJS
-
Supply Current in Sleep Mode (7)
VDD1 & V2 off, VSUP ≤ 12 V, oscillator running (10)
ISUP
-
(SLEEP1)
Supply Current in Sleep Mode (7)
VDD1 & V2 off, VSUP ≤ 12 V, oscillator not running
ISUP
-
(SLEEP2)
Supply current in sleep mode (7)
VDD1 & V2 off, VSUP = 18 V, oscillator running (10)
ISUP
-
(SLEEP3)
Supply Current in Stand-by Mode (7),(9)
ISUP(STDBY)
-
Iout at VDD1 = 40 mA, CAN recessive state or disabled
Supply Current in Normal Mode (7)
ISUP(NORM)
-
Iout at VDD1 = 40 mA, CAN recessive state or disabled
Supply Current in Stop mode (7),(9)
ISUP
-
I out VDD1 < 2.0 mA, VDD1 on (11), VSUP ≤ 12 V, oscillator
(STOP1)
running (10)
Supply Current in Stop mode (7),(9)
ISUP
-
Iout VDD1 < 2.0 mA, VDD1 on (11) VSUP ≤ 12V, oscillator
(STOP2)
not running (10)
Supply Current in Stop mode (7),(9)
ISUP
-
Iout VDD1 < 2.0 mA, VDD1 on (11), VSUP = 18 V, oscillator
(STOP3)
running (10)
-
27
V
95
130
µA
55
90
µA
170
270
µA
42
45
mA
42.5
45
mA
120
150
µA
80
110
µA
200
285
µA
Notes
6. VDD1 > 4.0 V, reset high, if RSTTH-2 selected and IOUT VDD1 reduced, logic pin high level reduced, device is functional.
7. Current measured at VSUP pin.
8. Device is fully functional. All modes available and operating, Watchdog, HS1 turn ON turn OFF, CAN cell operating, L0 and L1 inputs
operating, SPI read write operation. Over temperature may occur.
9. Measured in worst case condition with 5.0 V at V2 pin (V2 pin tied to VDD1).
10. Oscillator running means “Forced Wake-Up” or “Cyclic Sense” or “Software Watchdog” timer activated. Software Watchdog is
available in stop mode only.
11. VDD1 is ON with 2.0 mA typical output current capability.
33889
8
Analog Integrated Circuit Device Data
Freescale Semiconductor
Share Link: 