MC33375ST-1.8T3 데이터 시트보기 (PDF) - ON Semiconductor
부품명
상세내역
일치하는 목록
MC33375ST-1.8T3 Datasheet PDF : 14 Pages
| |||
MC33375, NCV33375 Series
THERMAL PROTECTION
Internal thermal limiting circuitry is provided to protect
the integrated circuit in the event that the maximum junction
temperature is exceeded. When activated, typically at
150°C, the output is disabled. There is no hysteresis built
into the thermal protection. As a result the output will appear
to be oscillating during thermal limit. The output will turn
off until the temperature drops below the 150°C then the
output turns on again. The process will repeat if the junction
increases above the threshold. This will continue until the
existing conditions allow the junction to operate below the
temperature threshold.
Thermal limit is not a substitute for proper
heatsinking.
The internal current limit will typically limit current to
450 mA. If during current limit the junction exceeds 150°C,
the thermal protection will protect the device also. Current
limit is not a substitute for proper heatsinking.
OUTPUT NOISE
In many applications it is desirable to reduce the noise
present at the output. Reducing the regulator bandwidth by
increasing the size of the output capacitor will reduce the
noise on the MC33375.
ON/OFF PIN
When this pin is pulled low, the MC33375 is off. This pin
should not be left floating. The pin should be pulled high for
the MC33375 to operate.
180
1.6
160
PD(max) for TA = 50°C
1.4
140
120
Minimum
Size Pad
100
80
60
0
5.0
RqJA
10
15
1.2
2.0 oz. Copper
L
1.0
ÎÎÎÎÎÎÎÎÎ L
0.8
0.6
0.4
20
25
30
L, LENGTH OF COPPER (mm)
Figure 25. SOT−223 Thermal Resistance and Maximum
Power Dissipation versus P.C.B. Copper Length
170
3.2
150
PD(max) for TA = 50°C
2.8
130
2.4
110
90
70
RqJA
Graph Represents Symmetrical Layout 2.0
ÎÎÎÎÎÎÎ 2.0 oz.
L Copper
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎ L
1.6
1.2
3.0
50
mm 0.8
30
0.4
0
10
20
30
40
50
L, LENGTH OF COPPER (mm)
Figure 26. SOP−8 Thermal Resistance and Maximum
Power Dissipation versus P.C.B. Copper Length
http://onsemi.com
10
Share Link: 