datasheetbank_Logo
전자부품 반도체 검색엔진( 무료 PDF 다운로드 ) - 데이터시트뱅크

MB90662APFM 데이터 시트보기 (PDF) - Fujitsu

부품명
상세내역
일치하는 목록
MB90662APFM Datasheet PDF : 84 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
MB90660A Series
Pin no.
SH-DIP*1 LQFP*2
Pin name
5
61 P42
SCK
6
62 P43
PWM
7
63 P44 to P45
8
64
INT0 to INT1
9
1 P46
INT2
TRG
10
2 P47
INT3
ATG
11 to 18 3 to 10 P50 to P57
AN0 to AN7
*1: DIP-64P-M01
*2: FPT-64P-M09
Circuit
type
Function
E General-purpose I/O port.
(CMOS/H) This function is activated when the clock output specification
of the UART is “disabled”.
UART clock I/O pin.
This function is activated when the clock output specification
of the UART is “enabled”.
Input is used only as necessary while serving as UART input.
It is therefore necessary to stop output beforehand using other
functions unless intentionally used otherwise.
E General-purpose I/O port.
(CMOS/H) This function is activated when the output specification of the
PWM is “disabled”.
PWM timer output pin.
This function is activated when the waveform output specifica-
tion of the PWM timer is “enabled”.
D General-purpose I/O ports.
(CMOS/H) This function is always active.
External interrupt request input pins.
Input is used only as necessary while external interrupts are
enabled.
D General-purpose input port.
(CMOS/H) This function is always active.
External interrupt request input pin.
Input is used only as necessary while external interrupts are
enabled.
Timer clear trigger input pin for multi-function timer.
Input is used only as necessary while multi-function timer
input is enabled.
D General-purpose input port.
(CMOS/H) This function is always active.
External interrupt request input pin.
Input is used only as necessary while external interrupts are
enabled.
Trigger input pin for the A/D converter.
Input is used only as necessary while the A/D converter is
performing input.
C
(AD)
Open-drain type I/O ports.
This function is enabled when the analog input enable register
specification is “port”.
Analog input pins for the A/D converter.
This function is enabled when the analog input enable register
specification is “AD”.
(Continued)
7

Share Link: 

datasheetbank.com [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]