MAAPGM0034-DIE 데이터 시트보기 (PDF) - Tyco Electronics
부품명
상세내역
일치하는 목록
MAAPGM0034-DIE Datasheet PDF : 6 Pages
| |||
0.5W X/Ku-Band Power Amplifier
100 pF
RFIN
RO-P-DS-3019 A 6/6
MAAPGM0034-DIE
VDD
0.1 µF
RFOUT
100 pF
VGG
0.1 µF
Figure 6. Recommended bonding diagram for pedestal mount.
Support circuitry typical of MMIC characterization fixture for CW testing.
Assembly Instructions:
Die attach: Use AuSn (80/20) 1-2 mil. preform solder. Limit time @ 300 °C to less than 5 minutes.
Wirebonding: Bond @ 160 °C using standard ball or thermal compression wedge bond techniques. For
DC pad connections, use either ball or wedge bonds. For best RF performance, use wedge bonds of
shortest length, although ball bonds are also acceptable.
Biasing Note: Must apply negative bias to VGG before applying positive bias to VDD to prevent
damage to amplifier.
Specifications subject to change without notice.
Email: macom_adbu_ics@tycoelectronics.com
North America: Tel. (800) 366-2266
Asia/Pacific: Tel.+81-44-844-8296, Fax +81-44-844-8298
Europe: Tel. +44 (1908) 574 200, Fax+44 (1908) 574 300
Visit www.macom.com for additional data sheets and product information.
Share Link: 