AT27LV512A-12TI 데이터 시트보기 (PDF) - Atmel Corporation
부품명
상세내역
일치하는 목록
AT27LV512A-12TI Datasheet PDF : 12 Pages
| |||
AT27LV512A
Rapid Programming Algorithm
A 100 µs CE pulse width is used to program. The address
is set to the first location. VCC is raised to 6.5V and OE/VPP
is raised to 13.0V. Each address is first programmed with
one 100 µs CE pulse without verification. Then a verifica-
tion / reprogramming loop is executed for each address. In
the event a byte fails to pass verification, up to 10 succes-
sive 100 µs pulses are applied with a verification after each
pulse. If the byte fails to verify after 10 pulses have been
applied, the part is considered failed. After the byte verifies
properly, the next address is selected until all have been
checked. OE/VPP is then lowered to VIL and VCC to 5.0V. All
bytes are read again and compared with the original data to
determine if the device passes or fails.
9
Share Link: 