LXDC2HN23A-324(2014) 데이터 시트보기 (PDF) - Murata Manufacturing
부품명
상세내역
일치하는 목록
LXDC2HN23A-324 Datasheet PDF : 31 Pages
| |||
LXDC2HN typeA series
Micro DC-DC converter
6-3 Thermal and Current De-rating Information
The following figure shows the power dissipation and temperature rise characteristics example. These data are
measured on Murata’s evaluation board of this device at no air-flow condition.
Io - Loss Characteristics (Vin=3.6V, Vo=1.8V)
400
350
300
250
200
150
100
50
0
0
100
200
300
400
500
600
Io (mA)
Loss - ΔT Characteristics (Vin=3.6V, Vo=1.8V)
50
45
40
35
30
25
20
15
10
5
0
0
100
200
300
400
Power Dissipation (mW)
The output current of the device may need to be de-rated if it is operated in a high ambient temperature or in a
continuous power delivering application. The amount of current de-rating is highly dependent on the
environmental thermal conditions, i.e. PCB design, nearby components or effective air flows. Care should
especially be taken in applications where the device temperature exceeds 85oC.
The case temperature of the device must be kept lower than the maximum rating of 125 oC. It is generally
recommended to take an appropriate de-rating to IC temperature for a reliable operation. A general de-rating for
the temperature of semiconductor is 80%.
MLCC capacitor’s reliability and the lifetime is also dependant on temperature and applied voltage stress.
Higher temperature and/or higher voltage cause shorter lifetime of MLCC, and the degradation can be
described by the Arrhenius model. The most critical parameter of the degradation is IR (Insulation Resistance).
The below figure shows MLCC’s B1 life based on a failure rate reaching 1%. It should be noted that wear-out
mechanisms in MLCC capacitor is not reversible but cumulative over time.
7
Dec 2014
Share Link: 