LTC3733-1 데이터 시트보기 (PDF) - Linear Technology

부품명

상세내역

일치하는 목록

LTC3733-1

3-Phase, Buck Controllers for AMD CPUs

Linear Technology 

LTC3733/LTC3733-1

PI FU CTIO S (G36/QFN)

TG1 to TG3 (Pins 33, 30, 22/Pins 32, 29, 20): High

Current Gate Drives for Top N-channel MOSFETs. These

are the outputs of floating drivers with a voltage swing

equal to the boost voltage source superimposed on the

switch node voltage SW.

BOOST1 to BOOST3 (Pins 34, 31, 21/Pins 33, 30, 19):

Positive Supply Pins to the Topside Floating Drivers.

Bootstrapped capacitors, charged with external Schottky

diodes and a boost voltage source, are connected between

the BOOST and SW pins. Voltage swing at the BOOST pins

is from boost source voltage (typically VCC) to this boost

source voltage + VIN (where VIN is the external MOSFET

supply rail).

PGOOD (Pin 35/Pin 34): This open-drain output is pulled

low when the output voltage is outside the PGOOD toler-

ance window. PGOOD is blanked during VID transitions

for approximately 120µs.

PLLIN (NA/Pin 38): Synchronization Input to Phase De-

tector. This pin is internally terminated to SGND with

50kΩ. The phase-locked loop will force the rising top gate

signal of controller 1 to be synchronized with the rising

edge of the PLLIN signal. This pin is not available in the

G36 package.

Exposed Pad (NA/Pin 39): Signal Ground. Must be sol-

dered to PCB.

3733f

9

Share Link: