datasheetbank_Logo
전자부품 반도체 검색엔진( 무료 PDF 다운로드 ) - 데이터시트뱅크

LTC1044A 데이터 시트보기 (PDF) - Linear Technology

부품명
상세내역
일치하는 목록
LTC1044A
Linear
Linear Technology Linear
LTC1044A Datasheet PDF : 14 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
LTC1044A
12V CMOS
Voltage Converter
Features
n 1.5V to 12V Operating Supply Voltage Range
n 13V Absolute Maximum Rating
n 200µA Maximum No Load Supply Current at 5V
n Boost Pin (Pin 1) for Higher Switching Frequency
n 97% Minimum Open Circuit Voltage Conversion
Efficiency
n 95% Minimum Power Conversion Efficiency
n IS = 1.5µA with 5V Supply When OSC Pin = 0V or V+
n High Voltage Upgrade to ICL7660/LTC1044
Applications
n Conversion of 10V to ±10V Supplies
n Conversion of 5V to ±5V Supplies
n Precise Voltage Division: VOUT = VIN/2 ±20ppm
n Voltage Multiplication: VOUT = ±nVIN
n Supply Splitter: VOUT = ±VS/2
n Automotive Applications
n Battery Systems with 9V Wall Adapters/Chargers
Description
The LTC®1044A is a monolithic CMOS switched-capacitor
voltage converter. It plugs in for ICL7660/LTC1044 in
applications where higher input voltage (up to 12V) is
needed. The LTC1044A provides several conversion func-
tions without using inductors. The input voltage can be
inverted (VOUT = –VIN), doubled (VOUT = 2VIN), divided
(VOUT = VIN/2) or multiplied (VOUT = ±nVIN).
To optimize performance in specific applications, a boost
function is available to raise the internal oscillator frequency
by a factor of seven. Smaller external capacitors can be
used in higher frequency operation to save board space.
The internal oscillator can also be disabled to save power.
The supply current drops to 1.5µA at 5V input when the
OSC pin is tied to GND or V+.
L, LT, LTC, LTM, Linear Technology and the Linear logo are registered trademarks of Linear
Technology Corporation. All other trademarks are the property of their respective owners.
Typical Application
Generating –10V from 10V
LTC1044A
1 BOOST V+ 8
+
2 CAP+
10µF 3 GND
OSC 7
LV 6
4 CAPVOUT 5
1044a TA01a
10V INPUT
–10V OUTPUT
10µF
Output Voltage vs Load Current, V+ = 10V
0
–1
TA = 25°C
C1 = C2 = 10µF
–2
–3
–4
–5
–6
SLOPE = 45Ω
–7
–8
–9
–10
0 10 20 30 40 50 60 70 80 90 100
LOAD CURRENT (mA)
1044a TA01b
For more information www.linear.com/LTC1044A
1044afa
1

Share Link: 

datasheetbank.com [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]