LC89058W-E 데이터 시트보기 (PDF) - SANYO -> Panasonic

부품명

상세내역

일치하는 목록

LC89058W-E

Digital Audio Interface Receiver

SANYO -> Panasonic 

LC89058W-E

Continued from preceding page.

• Equipped with a serial data input pin. Possible to switch with demodulation output automatically according to the

state of the PLL circuit.

• The fs reception range of S/PDIF interface can be limited. LC89058W-E can be set to a no-signal input state if the

reception range is exceeded.

• Supports I2S data output that facilitates interfacing with DSP.

2.3 Other

• Supports Multi-channel transfer and reception, using master/slave function.

• Equipped with a 4bits general-purpose I/O pins. They can be used for interface with peripheral ICs.

• The general-purpose I/O pins can also serve as selector inputs. Possible to switch with HDMI and XM-radio signals.

• Generates a DTS-CD/LD detection flag on detection of a DTS synchronization signal.

• Outputs interrupt signal for microcontroller (interrupt source can be selected).

• Calculates sampling frequency of input signal and outputs it from the terminal or microcontroller interface.

• Outputs IEC61937 burst preamble Pc from microcontroller interface.

• Outputs IEC60958 bit 1 of channel status (non-PCM data delimiter bit).

• Outputs emphasis information of channel status.

• Can use up to four LC89058W-Es at the same time by setting the 2-bit chip address.

• Runs on a single 3.3V power supply (S/PDIF input and microcontroller interface support 5V TTL interface.)

• SQFP48 package

Package Dimensions

unit : mm (typ)

3163B

9.0

7.0

36

25

37

24

48

13

1

12

0.5

0.18

0.15

(0.75)

SANYO : SQFP48(7X7)

No.A1056-2/64

Share Link: