LA5693AM 데이터 시트보기 (PDF) - SANYO -> Panasonic

부품명

상세내역

일치하는 목록

LA5693AM

Voltage Regulator Driver with Watchdog Timer

SANYO -> Panasonic 

LA5693AM

Note on application

1. For stable operation, place Cin, CO, and TR1 as near to the IC as possible.

2. When used in 0°C or below it, a capacitor of which impedance at high-frequency operation is low and has a good

temperature characteristic (such as SANYO OS-CON capacitor or others) should be used to prevent oscillation.

3. Set VS to the output voltage level where the circuit will be reset using external resistors R1 and R2. VS should be set

to 4V or greater due to internal circuit operation.

4. CCK must be inserted to cut the high range element of clock noise to prevent it from becoming a reset output noise.

5. For Ct, a capacitor which less varies the capacitance according to the temperature should be used.

Timing Chart

Note : Edge-triggered at the point indicated by the arrow of CK signal.

No.7559-5/7

Share Link: