LA5683T
Procedure for Setting the Software Start Time
• Channel 1 (the procedure is the same for channels 2, 3, and 4.)
The software start time of channel 1 is set by the capacitance of the capacitor connected between pin CSOFT1 to
CSOFT4 and GND.
• VB=0.5[V]
• VSOFT
Software start time tSOFT [S]
Charging
Set output voltage (VO): constant
Set output voltage (VO)
VCC
IN-
CSOFT
CSOFT
VB
tSOFT = -CSOFT × RSF1n(1 - RSF × ISF ) [S]
* The formula is for channel 1.
The software start time for channels 2 to 4 can be calculated in the same manner.
No.8214-9/12