ICSSSTUAH32865A 데이터 시트보기 (PDF) - Integrated Device Technology
부품명
상세내역
일치하는 목록
ICSSSTUAH32865A Datasheet PDF : 17 Pages
| |||
IDT74SSTUBH32865A
28-BIT 1:2 REGISTERED BUFFER FOR DDR2
COMMERCIAL TEMPERATURE GRADE
Timing Requirements Over Recommended Operating Free-Air Temperature
Range
VDD = 1.8V ± 0.1V
Symbol Parameter
Min.
Max. Units
fCLOCK Clock Frequency
410
MHz
tW
tACT
tINACT
Pulse Duration; CLK, CLK HIGH or LOW
Differential Inputs Active Time1
Differential Inputs Inactive Time2
1
ns
10
ns
15
ns
DCS0 before CLK↑, CLK↓, DCS and CSGateEN
HIGH; DCS1 before CLK↑, CLK↓, DCS0 and
0.6
tSU
Setup CSGateEN HIGH
Time DCSn, DODT, DCKE, and Dn after CLK↑, CLK↓
0.5
ns
PARIN after CLK↑, CLK↓
0.5
tH
Hold DCSn, DODT, DCKE, and Dn after CLK↑, CLK↓
0.4
Time PARIN after CLK↑, CLK↓
0.4
ns
1 VREF must be held at a valid input voltage level and data inputs must be held at valid logic levels for a
minimum time of tACT(max) after RESET is taken HIGH.
2 VREF, data, and clock inputs must be held at a valid input voltage levels (not floating) for a minimum
time of tINACT(max) after RESET is taken LOW.
Switching Characteristics Over Recommended Free Air Operating Range
(unless otherwise noted)
VDD = 1.8V ± 0.1V
Symbol Parameter
Min.
Max.
fMAX Max Input Clock Frequency
410
tPDM1 Propagation Delay, single bit switching, CLK↑ to CLK↓ to Qn
1.1
1.6
tPDQ2 Propagation Delay, single-bit switching, CLK↑ / CLK↓ to Qn
0.4
0.8
tPDMSS1 Propagation Delay, simultaneous switching, CLK↑ to CLK↓ to Qn
1.7
tLH LOW to HIGH Propagation Delay, CLK↑ to CLK↓ to PTYERR
1.2
3
tHL HIGH to LOW Propagation Delay, CLK↑ to CLK↓ to PTYERR
1
3
tPHL HIGH to LOW Propagation Delay, RESET↓ to Qn↓
3
tPLH LOW to HIGH Propagation Delay, RESET↓ to PTYERR↑
3
1 Design target as per JEDEC specifications.
2 Production Test. (See Production Test Circuit in TEST CIRCUIT AND WAVEFORM section.)
Units
MHz
ns
ns
ns
ns
ns
ns
ns
28-BIT 1:2 REGISTERED BUFFER FOR DDR2
10
IDT74SSTUBH32865A 7103/10
Share Link: 