HIN232CB-T 데이터 시트보기 (PDF) - Intersil
부품명
상세내역
일치하는 목록
HIN232CB-T Datasheet PDF : 20 Pages
| |||
HIN232, HIN236, HIN237, HIN238, HIN239, HIN240, HIN241
Pin Descriptions
PIN
FUNCTION
VCC
V+
Power Supply Input 5V ±10%.
Internally generated positive supply (+10V nominal), HIN239 requires +7.5V to +13.2V.
V-
Internally generated negative supply (-10V nominal).
GND
Ground lead. Connect to 0V.
C1+
External capacitor (+ terminal) is connected to this lead.
C1-
External capacitor (- terminal) is connected to this lead.
C2+
External capacitor (+ terminal) is connected to this lead.
C2-
External capacitor (- terminal) is connected to this lead.
TIN
TOUT
RIN
ROUT
EN
Transmitter Inputs. These leads accept TTL/CMOS levels. An internal 400kΩ pull-up resistor to VCC is connected to each lead.
Transmitter Outputs. These are RS-232 levels (nominally ±10V).
Receiver Inputs. These inputs accept RS-232 input levels. An internal 5kΩ pull-down resistor to GND is connected to each input.
Receiver Outputs. These are TTL/CMOS levels.
Enable input. This is an active low input which enables the receiver outputs. With EN = 5V, the receiver outputs are placed in
a high impedance state.
SD
Shutdown Input. With SD = 5V, the charge pump is disabled, the receiver outputs are in a high impedance state and the
transmitters are shut off.
NC
No Connect. No connections are made to these leads.
2
Share Link: 