GS1531 데이터 시트보기 (PDF) - Gennum -> Semtech
부품명
상세내역
일치하는 목록
GS1531 Datasheet PDF : 50 Pages
| |||
GS1531 Data Sheet
Table 1-1: Pin Descriptions (Continued)
Pin
Number
Name
Timing
Type Description
B8, F8, J8
C2
C3
D5
D6
E4
E5, F5
E6, F6
F1
F4
IO_GND
PD_VDD
PD_GND
DVB_ASI
LOCKED
SD/HD
CORE_GND
CORE_VDD
RSV
20bit/10bit
–
–
–
Non
Synchronous
Synchronous
with PCLK
Non
Synchronous
–
–
–
Non
Synchronous
Power
Power
Power
Input
Output
Input
Power
Power
–
Input
Ground connection for digital I/O buffers. Connect to digital GND.
Power supply connection for the phase detector. Connect to +1.8V DC
analog.
Ground connection for the phase detector. Connect to analog GND.
CONTROL SIGNAL INPUT
Signal levels are LVCMOS/LVTTL compatible.
When set HIGH in conjunction with SD/HD = HIGH and SMPTE_BYPASS
= LOW, the device will be configured to operate in DVB-ASI mode.
When set LOW, the device will not support the encoding of received
DVB-ASI data.
STATUS SIGNAL OUTPUT
Signal levels are LVCMOS / LVTTL compatible.
The LOCKED signal will be HIGH whenever the device has correctly
received and locked to SMPTE compliant data in SMPTE mode or
DVB-ASI compliant data in DVB-ASI mode, or when the device has
achieved lock in Data-Through mode.
It will be LOW otherwise.
CONTROL SIGNAL INPUT
Signal levels are LVCMOS/LVTTL compatible.
When set LOW, the device will be configured to transmit signal rates of
1.485Gb/s or 1.485/1.001Gb/s only.
When set HIGH, the device will be configured to transmit signal rates of
270Mb/s only.
Ground connection for the digital core logic. Connect to digital GND.
Power supply connection for the digital core logic. Connect to +1.8V DC
digital.
Connect to Analog GND.
CONTROL SIGNAL INPUT
Signal levels are LVCMOS/LVTTL compatible.
Used to select the input data bus width in SMPTE or Data-Through
modes.
When set HIGH, the parallel input will be 20-bit demultiplexed data.
When set LOW, the parallel input will be 10-bit multiplexed data.
30573 - 7 February 2008
8 of 50
Share Link: 