GL811E 데이터 시트보기 (PDF) - GENESYS LOGIC

부품명

상세내역

일치하는 목록

GL811E

USB 2.0 to ATA / ATAPI Bridge Controller

GENESYS LOGIC 

GL811E USB 2.0 to ATA/ATAPI Bridge Controller

CHAPTER 2 FEATURES

• Complies with Universal Serial Bus specification rev. 2.0.

• Complies with ATA/ATAPI-6 specification rev 1.0.

• Complies with USB Storage Class specification ver.1.0. (Bulk only protocol)

• Operating system supported: Win XP / 2000 / Me / 98 / 98SE; Mac OS 9.X / X.

• Integrated USB 2.0 Transceiver Macrocell Interface (UTMI) transceiver and Serial Interface Engine (SIE).

• USB 2.0 certified (TestID=40380268)

• Supports 4 endpoints: Control (0) / Bulk Read (1) / Bulk Write (2) / Interrupt (3).

• 64 / 512 bytes Data Payload for full / high speed Bulk Endpoint.

• Supports 16-bit Multiword DMA mode and Ultra DMA mode interface (Ultra 33 / 66).

• Embedded 7.5 MIPS RISC CPU.

• ROM size: 4k words; RAM size: 128 bytes.

• Supports Power Down mode and USB suspend indicator.

• Supports USB 2.0 TEST mode features.

• Supports 2 GPIO (GPIO5 & 6) for programmable AP (only for 64 pin package).

• Supports device power control for power on/off when running suspend mode (only for 64 pin package).

• Supports 32 bit and 48 bit LBA hard disk.

• Provides LED indicator for Full Speed and High Speed (only for 64 pin package).

• 12 MHz external clock to provide better EMI.

• 3.3V power input; 5V tolerance pad for IDE interface.

• Supports Wakeup ability.

• Available in 48-pin LQFP and 64-pin LQFP package.

©2000-2006 Genesys Logic Inc. - All rights reserved.

Page 8

Share Link: