SATURN 데이터 시트보기 (PDF) - Mitel Networks
부품명
상세내역
일치하는 목록
SATURN Datasheet PDF : 9 Pages
| |||
Preliminary Information
Electrical Characteristics (Mode Control)
Description
ENAVLE STARTUP MODE CDMA BAND 1900
SATURN
Conditions
Standby Mode
0
0
X
X
All circuits powered down
except logic inputs
Start up Mode
0
1
X
1
For high band IF
(210.38MHz)
0
1
X
0
For low band IF (85.38MHz)
Turns on VCO circuits, DLL
quadrature generation,
prescaler and IQ
demodulator. All other
circuits remain powered
down
CDMA mode
1
1
1
1
For high band IF
(210.38MHz)
1
1
1
0
For low band IF (85.38MHz)
All circuits operational
except for IF output buffer,
CDMA input stage selected.
FM Mode
1
1
0
0
All circuits operational
except for IF output buffer,
FM input stage selected.
Alternative FM mode
1
1
0
1
Note 4
CDMA IF AGC
only mode
1
0
1
X
Demodulator and LO
generation circuitry powered
down. IF output buffer
enabled
FM IF AGC
1
0
0
X
Demodulator and LO
generation circuitry powered
down. IF output buffer
enabled.
X = Don’t Care
Notes
1. STARTUP mode is provided to allow VCO/DLL/prescalers to stabilise before signal path is activated. This is a power-saving
feature since the signal path is redundant during this period. If this feature is not required, the ENABLE and STARTUP
control pins can be shorted together so that all circuitry is activated at the same time.
2. In high band mode (Band 1900 = 1) the VCO operates at twice the IF frequency. For example if IF = 210.38MHz then the
oscillator operates at 420.76MHz. A delay locked loop (DLL) circuit then generates the quadrature LO signals. The prescaler
output, VHFBUF, is VCO frequency divided by 8 (52.494MHz).
3. In low band mode (Band 1900 = 0) the VCO operates at 4 times the IF frequency. for example if IF = 85.38MHz the oscillator
operates at 341.52MHz. This is then divided and uses DLL circuit to provide the quadrature LO signals. The prescaler output,
VHFBUF, is VCO frequency divided by 8 (42.69MHz).
4
This mode can be used for FM. The VCO operates at twice the LO frequency. This mode is not normally used as a large
tuning range is required on the VCO. Prescaler output is LO frequency divided by four.
3
Share Link: 