FS6128-07 데이터 시트보기 (PDF) - ON Semiconductor
부품명
상세내역
일치하는 목록
FS6128-07 Datasheet PDF : 6 Pages
| |||
FS6128-07
EXAMPLE: A crystal with the following parameters is used: C1 = 0.025pF and C0 = 6pF. Using the minimum and maximum
CL1 = 10pF, and CL2 = 20pF, the tuning range (peak-to-peak) is:
3.2 Phase-Locked Loop (PLL)
The on-chip PLL is a standard frequency- and phase locked loop architecture. The PLL multiplies the reference oscillator frequency to
the desired output frequency by a ratio of integers. The frequency multiplication is exact with a zero synthesis error (unless otherwise
specified).
4.0 Electrical Specifications
Table 3: Absolute Maximum Ratings
Parameter
Symbol
Min.
Max.
Units
Supply voltage (Vss = ground)
VDD
VSS – 0.5
7
V
Input voltage, DC
VI
VSS – 0.5 VDD + 0.5
V
Output voltage, DC
VO
VSS – 0.5 VDD + 0.5
V
Input clamp current, DC (VI < 0 or VI > VDD)
IIK
-50
50
mA
Output clamp current, DC (VI < 0 or VI > VDD)
IOK
-50
50
mA
Storage temperature range (non-condensing)
TS
-65
150
°C
Ambient temperature range, under bias
TA
-55
125
°C
Junction temperature
TJ
125
°C
Lead temperature (soldering, 10s)
260
Per IPC/JEDEC J-STD-020B
Input static discharge voltage protection (MLD-STD 883E, Method 3015.7)
2
kv
Note: Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. These conditions represent a stress
rating only and functional operation of the device at these or any other conditions above the operational limits noted in this specification is not implied.
Exposure to maximum rating conditions for extended conditions may affect device performance, functionality and reliability.
CAUTION: ELECTROSTATIC SENSITIVE DEVICE
Permanent damage resulting in a loss of functionality or performance may occur if this device is subjected to a high energy
electrostatic discharge.
Table 4: Operating Conditions
Parameter
Supply voltage
Ambient operating temperature range
Crystal resonator frequency
Symbol
VDD
TA
fXTAL
Conditions/Descriptions
3.3V ± 10%
Functional mode
Min.
3.0
0
12
Typ.
3.3
13.5
Max.
3.6
70
18
Units
V
°C
MHz
Table 5: DC Electrical Specifications
Rev. 2 | Page 3 of 6 | www.onsemi.com
Share Link: 