EN29F040 데이터 시트보기 (PDF) - Unspecified

부품명

상세내역

일치하는 목록

EN29F040

4 Megabit (512K x 8-bit) Flash Memory

Unspecified 

EN29F040

The system must write the Erase Resume command (address bits are “don’t care”) to exit the

erase suspend mode and continue the sector erase operation. Further writes of the Resume command

are ignored. Another Erase Suspend command can be written after the device has resumed erasing.

Sector Protection/Unprotection

The hardware sector protection feature disables both program and erase operations in any sector. The

hardware sector unprotection feature re-enables both program and erase operations in previously

protected sectors.

Sector protection/unprotection must be implemented using programming equipment. The procedure re-

quires a high voltage (VID) on address pin A9 and the control pins. Contact Eon Silicon Devices, Inc. for

an additional supplement on this feature.

4800 Great America Parkway, Suite 202

10

Santa Clara, CA 95054

Rev. D, Issue Date: 2001/07/05

Tel: 408-235-8680

Fax: 408-235-8685

Share Link: