EA2-5NP 데이터 시트보기 (PDF) - NEC => Renesas Technology

부품명

상세내역

일치하는 목록

EA2-5NP

MINIATURE SIGNAL RELAY

NEC => Renesas Technology 

EA2 SERIES

GUIDE TO APPLICATIONS

1. When connecting coils, refer to the pin configuration to prevent misoperation or malfunction.

2. The latch type relay should be initialized at the appointed position (set or reset position) when using, and should

be energized or deenergized to the specified polarity to avoid wrong operations by reversed contact state.

3. Soldering should be done at 250˚C within 10 sec.

4. Ultrasonic cleaning is not recommended to keep reliable contact performance. Alcohol-based solvents are

available as proper solvents.

5. Pressurized stress on the relay cover is not favorable to keep reliable operation of the relay during operation.

6. Minimum contact load of the relay is 10 mV, 10 µA.

This value is a reference value in the resistance load.

Minimum capacity changes depending on swiching frequency and environment temperature and the load.

DATA SHEET ER0001EJ6V0DS00

7

Share Link: