E5CK-RRF 데이터 시트보기 (PDF) - OMRON Corporation

부품명

상세내역

일치하는 목록

E5CK-RRF

Digital Controller

OMRON Corporation 

Installation

I Installation

Main Parts

Terminals

Output Unit

Rear case

Setting Up the Output Unit

1. Two rectangular holes are provided on the power board (right side

of Controller). Fit the two protrusions of the Output Unit into these

two holes.

2. With the Output Unit fitted into the power board, fit the Output Unit

into the connector on the control board (left side of Controller).

1

2

Input type jump-

er connector

Option Unit

Front panel

Draw-out

First, draw out the internal mechanism from the housing.

Pull out the internal mechanism while pressing the hooks on the left

and right sides of the front panel.

Setting Up the Option Unit

1. Place the Controller with its bottom facing up, and fit the board

horizontally into the Connector on the power board (right side of

controller).

2. With the power board connected, fit the board vertically into the

Connector on the control board (left side of controller).

1

2

Digital Controller E5CK

I-69

Share Link: